By June 10, 2019 0 Comments Read More →

Electrical Maintenance Low and Medium Voltage: Trouble Shooting

Yogyakarta /Solo /Semarang | 17 – 18 Juni 2019 | Rp. 6.900.000,- Per peserta
Bandung/ Jakarta/ Surabaya | 17 – 18 Juni 2019 | Rp. 7.900.000,- Per peserta
Bali/ Batam/ Balikpapan/ Manado/ Lombok | 17 – 18 Juni 2019 | 8.900.000,- Per peserta
Yogyakarta /Solo /Semarang | 24 – 25 Juni 2019 | Rp. 6.900.000,- Per peserta

Jadwal Training 2019 Selanjutnya …

 

 

Medium Voltage and Low Training Description

The backbone of many electric power systems is the medium voltage distribution system. Typically operating at voltages ranging from 2,400 to 34,500 Volts, voltage stress, corona, surges and protection of equipment all create unique challenges in design, equipment selection, operation and engineering. This 2 day class takes you through the basics of medium voltage power systems including components,equipment, design and operation problems as well as protection of medium voltage systems.

 

Medium Voltage and Low Training Outline

  1. MEDIUM VOLTAGE SAFETY
    • • Electrocution at Low vs. Medium Voltage, Arc Flash,
    • • Qualified Person, Approach Boundaries
  2. TYPES OF MEDIUM VOLTAGE SYSTEMS
    • • Utility and Industrial One lines, Reliability Requirements,
    • • Overhead and Underground Systems, Regulated Systems
  3. MEDIUM VOLTAGE CABLE
    • • Copper vs. Aluminum Design, Voltage Ratings
    • • Insulation Ratings, 100%, 133%, 173% Insulation Levels,
    • • Shielding Requirements, Electric Fields, Terminating MV
    • • Conductors, Orientation of Overhead Lines
  4. MEDIUM VOLTAGE SUBSTATION TRANSFORMERS
    • • Core and Coil Design, Aluminum and Copper Windings
    • • Tank Construction, Loss Evaluation, Efficiency, Regulation
  5. SPOT NETWORKS
    • • Spot Network Design, Network Protectors, Network Protector
    • • Relay Operation, Directional Protection Requirements
  6. PARTIAL DISCHARGE
    • • Corona, Surface Tracking, Voltage Stress, Sensing Partial
    • • Discharge, Component Failure
  7. GROUNDING MEDIUM VOLTAGE SYSTEMS
    • • Resistance Grounding, Solid Grounding, Ungrounded Delta
    • • Charging Current, Effect of Ground Faults on Delta Voltage
  8. SURGE PROTECTION
    • • Lightning and Switching Surges, Classes of Surge Arresters
    • • MCOV Ratings – (Maximum Continuous Operating Voltage)
    • • TOV – (Maximum Temporary Over Voltage Capability),
    • • Protective Characteristics, Surge Arrester Selection, Energy
    • • Capability, Effect of Grounding on Arrestor Selection,
    • • Insulation Coordination,
  9. CURRENT TRANSFORMER APPLICATIONS
    • • Ratings, Selection Process, Accuracy, Saturation, Excitation
    • • Curves, Burden Calculation, Momentary Ratings
  10. MEDIUM VOLTAGE CIRCUIT BREAKERS
    • • Vacuum, Air, Oil, SF6 Designs, Symmetrical Interrupting
    • • Rating, K-Rated Voltage Factor, Close and Latch Capability
  11. RECLOSERS
    • • Application on Feeder Circuits, Recloser Settings
    • • Continuous Current and Interrupting Ratings
  12. MEDIUM VOLTAGE FUSES
    • • Medium Voltage Switches, Load Rating, Close and Latch
    • • Rating, Short Time Rating, Expulsion vs. Current Limiting
    • • Fuse Characteristics, E and R Rated Fuses, Fuse Cutouts
  13. MEDIUM VOLTAGE PROTECTION CONCEPTS
    • • Medium Voltage Protection, Relays, Circuit Breakers, R and
    • • E rated Fuses, Short Circuit vs. Overcurrent Protection
  14. DISTRIBUTION FEEDER PROTECTION
    • • Protection with Fuses – 300%, Overcurrent Protection with
    • • Relays – 600%, Short Circuit Damage Characteristics, Relay
    • • “Reach” for End of Line Faults
  15. ROTATING MACHINERY PROTECTION
    • • Requirements, Decrement Curves, Thermal Damage Curves,
    • • Reactive, Capability Curves, Differential Protection
  16.  MEDIUM VOLTAGE MOTOR CONTROLLERS
    • • Protection Requirements, Motor Management Relays, Circuit
    • • Breaker Protection, Relaying, Class R Rated Fuses
  17. TRANSFORMER PROTECTION
    • • ANSI C57 Thru Fault Curves, Impact of Transformer Winding
    • • Configuration, Overview of Differential Protection, Inrush and
    • • Harmonic Restraint

 

Medium Voltage and Low Training Participants

  • D3 atau SLTA yang berpengalaman kerja minimal 3 tahun, dan atau setara.
  • Teknisi, Operator dan Supervisor didalam bidang management kelistrikan dan atau non teknik.
  • Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.



Medium Voltage and Low Training Methods

Presentation, discuss, case study.

 

Jadwal Training 2019

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta

  • 17 – 18 Juni 2019
  • 24 – 25 Juni 2019
  • 1 – 2 Juli 2019
  • 8 – 9 Juli 2019
  • 15 – 16 Juli 2019
  • 22 -23 Juli 2019
  • 29 – 30 Juli 2019
  • 5 – 6 Agustus 2019
  • 13-14 Agustus 2019
  • 19 – 20 Agustus 2019
  • 26 -27 Agustus 2019
  • 02 – 03 September 2019
  • 09-10 September 2019
  • 16 – 17 September 2019
  • 23 – 24 September 2019
  • 30 September – 01 Oktober 2019
  • 07 – 08 Oktober 2019
  • 14 – 15 Oktober 2019
  • 21 – 22 Oktober 2019
  • 28 – 29 Oktober 2019
  • 04 – 05 November 2019
  • 11 – 12 November 2019
  • 18 – 19 November 2019
  • 25 – 26 November 2019
  • 02 -03 Desember 2019
  • 09 – 10 Desember 2019
  • 16 – 17 Desember 2019
  • 23 – 24 Desember 2019
  • 30 – 31 Desember 2019

 

Medium Voltage and Low Training Investment and Facilities

  • 8.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
  • 7.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%)) untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 6.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk Lokasi Solo, Semarang atau Yogyakarta
  • VIP training Rp 8.9000 (3 Hari, Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%) untuk Yogyakarta, Semarang atau Solo
  • VIP training Rp 9.9000 (3 Hari, Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%) untuk Bandung, Jakarta atau Surabaya
  • VIP training Rp 10.9000 (3 Hari, Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10% ) untuk Bali, Batam, Balikpapan, Manado atau Lombok
  • Quota minimum 2 peserta
  • Quota minimum 3 peserta ( Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Medium Voltage and Low Training Instructur

Tugino, ST.,MT dan Tim

Having knowledge and experience as practician and trainer in Electricity Maintenance.


Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  5. PERSONAL DATA
  10. (valid email required)
  16. PRE REGISTRATION DATA (Tidak Mengikat)
  23. MESSAGE FOR TRAINING PROVIDER
 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • MisterWong
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit

Related posts:

  1. LOW AND MEDIUM VOLTAGE: ELECTRICAL MAINTENANCE (Pasti Jalan)
  2. HIGH VOLTAGE ELECTRICAL EQUIPMENT – Pasti Jalan
  3. Lightning Protection and Grounding System
  4. Electrical Grounding & Lightning Protection – PASTI JALAN
Posted in: Bali, Balikpapan, Bandung, Batam, Electrical, Jakarta, Lombok, Semarang, Solo, Surabaya, Yogyakarta

About the Author:

Post a Comment