By November 23, 2012 0 Comments Read More →

BELT CONVEYORS AND HUTES Plus CONVEYOR, CHUTE AND FEEDER DESIGN

Maintenance and Troubleshooting of BELT CONVEYORS AND HUTES Plus CONVEYOR, CHUTE AND FEEDER DESIGN

Yogyakarta | 11-13 Desember 2012  | 08.00 – 16.00 WIB | Rp.7.000.000/orang

 

 

Description

The workshop is broken into three days – the first two days will cover basic conveyors, selection, safety, legal obligations, terminology and background and an optional third day will deal with the nuts and bolts of conveyor, chute and feeder design. Belt conveyors frequently provide the most satisfactory and economical method of transporting materials such as mine ores, earth, sand, crushed stone, cement and concrete. The high and continuous speed of operation of the belt makes for a high capacity of transport of materials. This workshop is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to troubleshooting, maintenance and basic design rules of conveyors and chutes. It is intended to cover the fundamentals of belt conveying and would be useful for those with little experience in this area. Before commencing a detailed course on conveyors it is important to have a solid practical knowledge of the material to be conveyed. A basic knowledge is provided of the bulk materials characteristics and properties. This will enable you to have a far stronger ability to troubleshoot and design workable conveyor systems. Numerous tips throughout the course make it practical and topical. You will also engage in problem solving and case studies to absorb the materials as quickly and effectively as possible.

Outline

1.    INTRODUCTION

  •  Fundamentals of bulk materials handling
  • Nature of bulk solids
  • Characteristics of generally used bulk materials
  • Conveyors and chutes overview

Practical Exercise
2.    BELT CONVEYING

  • Introduction
  •  Layout
  • Basic Configuration
  • Components of a standard conveyor
  • Capacity of belt conveyors and selection of belt width
  •  Selection of other components (belt, idlers, pulleys and takeups etc.)
  • Simple calculation of belt tension
  • Selection of drive
  • Troubleshooting tips
  • Take-ups
  •  Operation and maintenance of belts
  • Tips for cost savings
  • Practical Exercise

3.    SAFETY OF CONVEYORS

  • Conveyor safety standard
  •  General background on AS 4024.1 (RA and hazard recognition)
  • Hazard recognition
  •  History of accidents
  • Key conveyor safety issues
  •  Demonstration of unsafe conveyors
  • AS 1755 conveyors
  •  Chute doors hazards and controls
  • Case Study
  • Practical Exercise

4.    MAINTENANCE AND TROUBLESHOOTING OF CONVEYORS

  • Troubleshooting conveyor problems
  • Types of joints
  •  Splice failures
  • Splice inspections
  • Splice repairs
  •  Typical problems
  • Root cause process
  • Systematic approach for tracking
  • Site specific problems
  • Case Study
  • Practical Exercise

5.    CHUTE MAINTENANCE AND TROUBLESHOOTING

  •  Transfer chutes theory
  • Laser scanning applications
  • Best practice design
  • Boosting flow
  • Troubleshooting chutes
  •  Spillage and buildup
  •  The awkward marriage of conveyor and chutes
  • Practical Exercise

6.    FEEDERS MAINTENANCE AND TROUBLESHOOTING

  • Belt, apron, screw and other feeders
  • Optimum draw down
  • Troubleshooting typical problems
  • Practical Exercise

7.    STORAGE AND FLOW

  • Flow properties of materials
  •  Funnel – flow and expanded flow
  • Flow rate analysis
  • Gravity reclaim
  • Bin wall pressures
  • Practical Exercise

8.    PRACTICAL CONVEYOR DESIGN

  • Review of bulk material characteristics
  • Layout
  •  Component selection
  •  Lump size limitation
  • Capacity
  •  Minimum pulley diameters
  • Burden cross sectional area calculations
  •  Volumetric capacity
  • Velocity calculations
  •  Idler spacing and load rating
  • Belt tension calculations
  • Drive arrangements
  •  Power demand capacity
  • Starting and stopping
  • Start up current calculations
  •  Vertical curves
  • Gearbox and drive selection
  • Safety factors
  • Bearing types and selection
  • Conveyor design calculations Exercises

9.    CHUTE DESIGN

  • Liner selection
  •  Use of solidworks
  • DEM and application to transfer design
  • Stress analysis using cosmos
  •  Chute Design Exercise

10.      FEEDER DESIGN

  • Calculation of loads/drive torques and power
  • Feeder selection
  • Feeder Design Exercise

11.    APPLICATIONS AND FUTURE TRENDS

  • Case studies
  • Future trends in conveyors, feeders and chutes



Participant

  • Maintenance Engineers, Technicians and Staff
  • Plant Engineers
  • Operation, Maintenance, Inspection and Repair Managers,
  • Supervisors and Engineers
  • Mechanical Engineers and Technicians
  • Design Engineers
  • Electrical Engineers and Technicians
  • Consulting Engineers


Instructor

Teguh Pudji Purwanto, Ir, MT
Pakar sekaligus praktisi di bidang Mechanical dan Electrical Engineering, dan akademisi di bidang Belt Conveyor.

Teguh Santosa, Ir
Pakar sekaligus praktisi di bidang Mechanical dan Electrical Engineering, dan praktisi di bidang Belt Conveyor.Instruktur aktif sebagai pembicara dalam berbagai pelatihan dan seminar bidang Electrical, Mechanical, dan khususnya mengenai Belt Conveyor.


Time & Venue

  • Tanggal   :  11-13 Desember 2012
  • Pukul       : 08.00 – 16.00 WIB
  • Tempat    : Hotel IBIS Jogja



Course Fee

  •        Rp. 7.000.000 untuk pengiriman peserta 1 orang
  •        Rp. 6.200.000 untuk pengiriman peserta 3 orang dari company yang sama
  •        Rp. 6.000.000 untuk pengiriman peserta 4 atau lebih dari company yang sama



Facilities

  • ·Module / Handout
  • ·Flashdisk softcopy Materi
  • Sertifikat
  • Bag or bagpackers
  • Training Kit
  • 2xCoffe Break & 1 Lunch
  • Souvenir
  • Airport pickup service
  • Training room full AC and Multimedia

 

 

 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • MisterWong
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit

About the Author:

Post a Comment