BOILER EFFICIENCY (ASME PTC 4-1) – Pasti Jalan

BOILER EFFICIENCY (ASME PTC 4-1)

Yogyakarta | 26 – 28 Juni 2018 | Rp 6.000.000,- PASTI JALAN
Yogyakarta | 03 – 05 Juli 2018 | Rp 6.000.000,-
Yogyakarta | 28 – 30 Agustus 2018 | Rp 6.000.000,-
Yogyakarta | 18 – 20 September 2018 | Rp 6.000.000,-

Jadwal Training 2018 Selanjutnya …

 

 

 

OVERVIEW

Performance of the boiler, like efficiency and evaporation ratio reduces with time, due to poor combustion, heat transfer fouling and poor operation and maintenance. Deterioration of fuel quality and water quality also leads to poor performance of boiler. Efficiency test-ing helps us to find out how far the boiler efficiency drifts away from the best efficiency. Any observed abnormal deviations could therefore be investigated to pinpoint the problem area for necessary corrective action. Hence it is necessary to find out the current level of efficiency for performance evaluation, which is a pre requisite for energy conservation action in industry.

 

OBJECTIVES

Training Objectives ASME PTC 4-1:

  • Understanding of object & scope of PTC 4 – 1
  • Understanding of definition and description that used on PTC 4 – 1
  • Understanding steam generator performance test principle
  • Familiar with test instrumentation
  • Understanding of measurement methods of measurement methods
  • Understanding steam generator performance calculation
  • Know how to report of test result

 

COURSE CONTENTS

Material Outline Training ASME PTC 4 – 1

  1. Introduction
  2. Object & scope of PTC 4 – 1
  3. Definition and description term
  4. Performance test principle
  5. Instrumentation
  6. Measurement methods
  7. Performance calculation
  8. Report of test result

 

WHO SHOULD ATTEND

This training is recommended to be followed by :

  • Mechanical, Construction
  • Operators, Technicians, Maintenance Personnel who involved in installation, testing, operation and maintenance of steam generator
  • Experienced professionals who want to refresh or broaden their knowledge of steam generator performance according ASME PTC 4- 1

 

METHODS

  • Lecturing
  • Discussion/Sharing
  • Case Study
  • Simulation
  • Evaluation

 

INSTRUCTOR

  • Ir. Victor Malau DEA
  • Gregorius Harjanto

(Expert in mechanical dan electrical engineering)

 

 



TRAINING TIME & VENUE BOILER EFFICIENCY (ASME PTC 4-1)

  • Batch 6: 26 – 28 Juni 2018 (Yogyakarta)
  • Batch 7: 03 – 05 Juli 2018
  • Batch 8: 28 – 30 Agustus 2018
  • Batch 9: 18 – 20 September 2018
  • Batch 10: 09 – 11 Oktober 2018
  • Batch 11: 27 – 29 November 2018
  • Batch 12: 04 – 06 Desember 2018
  • 08.00 am – 16.00 pm
  • Yogyakarta: Ibis Styles Hotel Yogyakarta ; Cavinton Hotel Yogyakarta ; Neo Malioboro Hotel Yogyakarta
  • Surabaya: Zodiak Hotel Surabaya ; Hotel Santika Pandegiling Surabaya / Bandung: Golden Flower Hotel Bandung
  • Jakarta: Ibis Jakarta Arcadia Hotel / Bali: Ibis Bali Kuta Hotel ; Ibis Styles Bali Kuta Circle

In House Training : Depend on request

 

TUITION FEE

Yogyakarta:

  • Rp 7.000.000,- /participant (non residensial)
  • Special Rate: Rp 6.500.000,- (min 3 participants from the same company)

Bandung / Jakarta / Surabaya:    Rp 8.000.000,- /participant (non residensial)

Bali:     Rp 9.000.000,- /participant (non residensial)

 

 

FACILITIES

  • Meeting Room at Hotel
  • Coffe Break & Lunch
  • Module (hard & soft copy/flashdish)
  • Training Kit
  • Souvenir
  • Sertifikat
  • Airport pick up services
  • Transportation during training

 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • MisterWong
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit

About the Author:

Post a Comment