By October 21, 2015 0 Comments Read More →

EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING
Yogyakarta | 26 – 27 Oktober 2015 | Rp. 4.900.000 Per Peserta
Semarang / Solo | 26 – 27 Oktober 2015 | Rp. 5.900.000 Per Peserta
Bandung / Jakarta / Surabaya | 26 – 27 Oktober 2015 | Rp. 6.900.000 Per Peserta
Bali / Batam /Balikpapan / Manado / Lombok | 26 – 27 Oktober 2015 | Rp. 7.900.000 Per Peserta
Yogyakarta | 02 – 09 November 2015 | Rp. 4.900.000 Per Peserta

Jadwal Training 2015 Selanjutnya …

 

 



DESKRIPSI

In the oil & gas and petrochemical industries, compressors play important role to support all facilities and process that require pressurized gases. Furthermore, air or gas leakage is not acceptable since it affecting on productivity or safety. Hence compressor flange joint integrity should be taken into account.

The reliability of the flanged joint depends critically on competent control of the joint making process, alignment, assembly, and its measurement. It is common to put considerable effort into the design process only for improper assembly to lead to joint failure. Therefore it is important that joint making is undertaken by trained and validated technicians who have an understanding of the procedure and the underlying principles and practice.

To achieve better performance on flange joint, it is important to ensure that all individuals with responsibilities in connection with ensuring the safe control of flange joints are trained and validated as competent to undertake these responsibilities. The program is based around a presentation of best practices and utilizes an intelligent bolting system to explain and demonstrate these principles. This unique method allows key areas of joint making e.g. the need to use bolt lubricant, to be clearly understood.

 

MATERI

  1. Introduction to compressor alignment and assembly
  2. Flange Joint Preparation and Assembly
  3. Flange design and standard
  4. Bolt and bolt joint
  5. Bolt and flange strength
  6. Stress Analysis and Tightening Joints
  7. Load control vs torque control
  8. Load and torque measurement
  9. Intelligent bolt control
  10. Protection and Maintenance

 

Metode

Presentasi, Diskusi , Studi Kasus

 

 

 

Jadwal Training 2015

Tempat (Tentative):

  • Hotel Santika Kuta, Bali
  • Hotel Nagoya Plaza, Batam
  •  Hotel Fave, Balikpapan
  • Hotel Aston, Manado
  • The Santosa Villas and Resort, Lombok
  • Hotel Gino Ferucci, Bandung
  •  Hotel Santika Pandegiling, Surabaya
  • Hotel Fave Pasar baru Jakarta, Jakarta
  • Hotel Ibis Solo
  • Hotel Ibis Simpang Lima, Semarang
  • Hotel Ibis Malioboro, Yogyakarta

Tanggal:

  • 02 – 03 Februari 2015
  • 09 – 10 Februari 2015
  • 16 – 17 Februari 2015
  • 23 – 24 Februari 2015
  • 02 – 03 Maret 2015
  • 09 – 10 Maret 2015
  • 16 – 17 Maret 2015
  • 23 – 24 Maret 2015
  • 30 – 31 Maret2015
    06 – 07 April 2015
  • 13 – 14 April 2015
  • 20 – 21 April 2015
  • 27 – 28 April 2015
  • 04 – 05 Mei 2015
  • 11 – 12 Mei 2015
  • 18 – 19 Mei 2015
  • 25 – 26 Mei 2015
  • 03 – 04 Juni 2015
  • 08 – 09 Juni 2015
  • 15 – 16 Juni 2015
  • 22 – 23 Juni 2015
  • 29 – 30 Juni 2015
  • 06 – 07 Juli 2015
  • 13 – 14 Juli 2015
  • 27 – 28 Juli 2015
  • 03 – 04 Agustus 2015
  • 10 – 11 Agustus 2015
  • 18 – 19 Agustus 2015
  • 24 – 25 Agustus 2015
  • 31 Agustus – 1 September2015
  • 07 – 08 September 2015
  • 14 – 15 September 2015
  • 21 – 22 September 2015
  • 28 – 29 September 2015
  • 05 – 06 Oktober 2015
  • 12 – 13 Oktober 2015
  • 19 – 20 Oktober 2015
  • 26 – 27 Oktober 2015
  • 02 – 03 November 2015
  • 09 – 10 November 2015
  • 16 – 17 November 2015
  • 23 – 24 November 2015
  • 30 November – 1 Desember 2015
  • 07 – 08 Desember 2015
  • 14 – 15 Desember 2015
    21 – 22 Desember 2015
  • 28 – 29 Desember 2015

 

Investasi dan Fasilitas

  • Rp.7.900.000 (Non Residential) untuk lokasi di Bali, Batam, Balikpapan, Manaado atau Lombok
  • Rp. 6.900.000 (Non Residential) untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 5.900.000 (Non Residential) untuk Lokasi Solo atau Semarang
  • Rp. 4.900.000 (Non Residential) untuk lokasi di Yogyakarta
  • Quota minimum 3 peserta ( Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
  • Fasilitas : Certificate,Training kits, USB, Lunch, Coffee Break, Souvenir

 

Instruktur

Ir. Paryana Puspaputra, M.Eng. and Team

 

 

 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • MisterWong
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit

About the Author:

Post a Comment