By August 7, 2015 0 Comments Read More →



Yogyakarta | 25 – 28 August 2015 | Rp 7.950.000/person
Yogyakarta | 29 Sept – 02 October 2015 | Rp 7.950.000/person
Yogyakarta | 06 – 09 October 2015 | Rp 7.950.000/person
Yogyakarta | 03 – 06 November 2015 | Rp 7.950.000/person
Yogyakarta | 15 – 18 December 2015 | Rp 7.950.000/person




In the oil & gas and petrochemical industries, compressors play important role to support all facilities and process that require pressurized gases. Furthermore, air or gas leakage is not acceptable since it affecting on productivity or safety. Hence compressor flange joint integrity should be taken into account.

The reliability of the flanged joint depends critically on competent control of the joint making process, alignment, assembly, and its measurement. It is common to put considerable effort into the design process only for improper assembly to lead to joint failure. Therefore it is important that joint making is undertaken by trained and validated technicians who have an understanding of the procedure and the underlying principles and practice.

To achieve better performance on flange joint, it is important to ensure that all individuals with responsibilities in connection with ensuring the safe control of flange joints are trained and validated as competent to undertake these responsibilities. The program is based around a presentation of best practices and utilizes an intelligent bolting system to explain and demonstrate these principles. This unique method allows key areas of joint making e.g. the need to use bolt lubricant, to be clearly understood.


The training covers a broad spectrum of topics which can be tailored to suit requirements including:

  1. Introduction to compressor alignment and assembly
  2. Flange Joint Preparation and Assembly
  3. Flange design and standard
  4. Bolt and bolt joint
  5. Bolt and flange strength
  6. Stress Analysis and Tightening Joints
  7. Load control vs torque control
  8. Load and torque measurement
  9. Intelligent bolt control
  10. Protection and Maintenance


Dr.Ir. Paryana Puspaputra, M.Eng., and Team

Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012. He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, CAESAR II, etc.


Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)


4 days


8. 25 Aug 2015-28 Aug 2015
9. 29 Sep 2015-02 Oct 2015
10. 06 Oct 2015-09 Oct 2015
11. 03 Nov 2015-06 Nov 2015
12. 15 Dec 2015-18 Dec 2015


  1. Rp 7.950.000/person (full fare) or
  2. Rp 7.750.000/person (early bird, payment 1 week before training) or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)


  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of flange joint integrity training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • MisterWong
  • Y!GG
  • Webnews
  • Digg
  • StumbleUpon
  • Reddit

About the Author:

Post a Comment