By May 27, 2019 0 Comments Read More →

MACHINERY DIAGNOSTIC

MACHINERY DIAGNOSTIC: VIBRATION INFORMATION AND FUNDAMENTALS OF ROTATING MACHINERY DIAGNOSTICS

Yogyakarta /Solo /Semarang | 12 – 13 Juni 2019 | Rp. 6.900.000,- Per peserta
Bandung/ Jakarta/ Surabaya | 12 – 13 Juni 2019 | Rp. 7.900.000,- Per peserta
Bali/ Batam/ Balikpapan/ Manado/ Lombok | 12 – 13 Juni 2019 | 8.900.000,- Per peserta
Yogyakarta /Solo /Semarang | 17 – 18 Juni 2019 | Rp. 6.900.000,- Per peserta

Jadwal Training 2019 Selanjutnya …

 

 

DESKRIPSI TRAINING MACHINERY DIAGNOSTIC

Peoplewill learn to read and interpret vibration data plots and to recognize common rotating machinery malfunctions. Students will develop these abilities by gaining understanding of the fundamental principles that govern rotating machinery vibration. Application of these principles will enable students to understand the basic root causes of machinery malfunctions and their corrective actions. Multiple hands-on labs will give students opportunity to practice their skills using real machine case histories and lab stations equipped with rotor kits and advanced diagnostic instruments. See Outline for more.

 

TUJUAN TRAINING MACHINERY DIAGNOSTIC

To provide the knowledge and skills to better operate, maintain, manage, diagnose and design rotating machinery using vibration information and fundamentals of rotating machinery diagnosticS.

 

MATERI TRAINING MACHINERY DIAGNOSTIC

1. The Fundamentals of Vibration

  • Basic Vibration Signal
  • Displacement / Velocity / Acceleration
  • Vibration Vectors
  • Frequence
  • Amplitude
  • Phase
  • Vibration of Machines
  • Phase Measurement Workshop

2. Interpreting Vibration Data Plots

  • Steady State Plots: Timebase, Orbit, Average Shaft Centerline Plots
  • Start-up and Shutdown Plots: Bode, Polar, APHT
  • Spectrum Plots
  • Trend Plots
  • Vibration Plot Workshop

3. Static and Dynamic Rotor Response

  • The Rotor System Model and the Forces Acting on the Rotor
  • Dynamic Stiffness and Rotor Behavior
  • Single Plane Balancing
  • Single Plane Balancing Workshop
  • Modes of Vibration
  • Anisotropic Stiffness

4. Introduction to Machinery Malfunction Diagnosis

  • Unbalance
  • Misalignment and High Radial Loads
  • Rubs and Looseness
  • Fluid-Induced Instabilities (Oil Whirl and Oil Whip)
  • Shaft Cracks

 

PESERTA TRAINING MACHINERY DIAGNOSTIC

  1. Rotating equipment engineers, operators, vibration analysts and technicians, supervisors and managers responsible for operation, maintenance and reliability of rotating equipment.
  2. OEM designers of rotating equipment who require knowledge of the root causes of vibration and the mechanisms that lead to harmful malfunctions.



METODE TRAINING MACHINERY DIAGNOSTIC

Presentasi, Diskusi , Studi Kasus

 

Jadwal Training 2019

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta

  • 12 – 13 Juni 2019
  • 17 – 18 Juni 2019
  • 24 – 25 Juni 2019
  • 1 – 2 Juli 2019
  • 8 – 9 Juli 2019
  • 15 – 16 Juli 2019
  • 22 -23 Juli 2019
  • 29 – 30 Juli 2019
  • 5 – 6 Agustus 2019
  • 13-14 Agustus 2019
  • 19 – 20 Agustus 2019
  • 26 -27 Agustus 2019
  • 02 – 03 September 2019
  • 09-10 September 2019
  • 16 – 17 September 2019
  • 23 – 24 September 2019
  • 30 September – 01 Oktober 2019
  • 07 – 08 Oktober 2019
  • 14 – 15 Oktober 2019
  • 21 – 22 Oktober 2019
  • 28 – 29 Oktober 2019
  • 04 – 05 November 2019
  • 11 – 12 November 2019
  • 18 – 19 November 2019
  • 25 – 26 November 2019
  • 02 -03 Desember 2019
  • 09 – 10 Desember 2019
  • 16 – 17 Desember 2019
  • 23 – 24 Desember 2019
  • 30 – 31 Desember 2019

 

Investasi dan Fasilitas TRAINING MACHINERY DIAGNOSTIC

  • 8.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
  • 7.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%)) untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 6.900.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk Lokasi Solo, Semarang atau Yogyakarta
  • VIP training Rp 8.9000 (3 Hari, Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%) untuk Yogyakarta, Semarang atau Solo
  • VIP training Rp 9.9000 (3 Hari, Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%) untuk Bandung, Jakarta atau Surabaya
  • VIP training Rp 10.9000 (3 Hari, Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10% ) untuk Bali, Batam, Balikpapan, Manado atau Lombok
  • Quota minimum 2 peserta
  • Quota minimum 3 peserta ( Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Instruktur TRAINING MACHINERY DIAGNOSTIC

Ir Teguh Pudji Poerwanto MT and Team

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. PERSONAL DATA
  4. (valid email required)
  5. PRE REGISTRATION DATA (Tidak Mengikat)
  6. MESSAGE FOR TRAINING PROVIDER
 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • MisterWong
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit

About the Author:

Post a Comment