Training Engineering

PELUMAS DAN SISTEM PELUMASAN

| September 27, 2011 | 0 Comments

PELUMAS DAN SISTEM PELUMASAN
Hotel Golden Flower, Bandung | 02 – 05  April 2012 | Rp 7.250.000 / person
Hotel Golden Flower, Bandung 02 – 05 Juli 2012 | Rp 7.250.000 / person
Hotel Harris Tuban Bali/ Hotel Bintang****| 01 – 04 Oktober 2012 | Rp  8.750.000 / person


TRAINING OBJECTIVES:

  • Pemilihan pelumas dan bahan aditive yang sesuai dengan kebutuhan
  • Pemilihan dengan benar penggunaan pelumas-grease atau pelumas-oli
  • Penyusunan prosedur lubrikasi untuk peralatan industri
  • Penyusunan prosedur untuk draining dan flushing pada sistem lubrikasi
  • Penyusunan kondisi dan jumlah pelumas di reservoir dan sump dengan benar
  • Penyusunan jumlah cadangan pelumas yang optimal
  • Penyusunan prosedur handling dan penyimpanan pelumas



TRAINING MATERIAL OUTLINE:

  1. Prinsip dan jenis-jenis pelumasan
  2. Klasifikasi pelumas dan aditive
  3. Pelumas mineral, sintetik dan vegetable
  4. Minyak pelumas dan grease
  5. Pelumas ramah lingkungan
  6. Sistem pelumasan terpusat dan terpisah
  7. Menentukan frekuensi dan kuantitas pelumasan
  8. Kontaminasi, filtrasi, rekondisi pelumas
  9. Penyimpanan pelumas: keselamatan kerja,container pelumas,handling pelumas dan penanganan limbah pelumas
  10. Oil seal: tipe dan pemilihannya
  11. Pelumas pada bantalan gelinding
  12. Pelumas untuk mesin perkakas
  13. Pengendalian Pelumas
  14. Pelumas untuk motor torak
  15. Pelumas untuk sistem hidrolik dan transmisi
  16. Workshop Manajemen Pelumasan
  17. Diskusi dan Tanya jawab



INSTRUKTUR TRAINING

Ir. Ali Mahmudi, M.Eng.  and Ir. M. Munir Fahmi, Dipl.ME., MT.

Ir. Ali Mahmudi, M.Eng. graduated from mechanical and system engineering department RMIT Melbourne Australia for his magister and from Mechanical Engineering Bandung Institute of Technology (ITB) for his bachelor. His core expertise is in fluid and thermal energy convertion machine. Ir. Ali Mahmudi, M.Eng. is lecturer at mechanical engineering Poltek ITB (Polban), and at mechanical engineering PEDC and also at faculty of technique  UNISBA(Universitas islam Bandung). In campus he teach for subjects as follows Termodinamika Teknik, Mekanika Fluida, Perpindahan Kalor & Penukar Kalor, Pompa & Kompresor, Boiler & Turbin, Pneumatik & Hidrolik, Mekatronika, Mesin Konversi Energi Fluida & Termal, Teknik perawatan & Perbaikan Mesin, Instrumentasi, Mekanika & Mesin Fluida, and Penggerak Mula.  Ir. Ali Mahmudi, M.Eng. has frequently taught training for companies in Indonesia for many topics included in his majoring expertise.

Ir. M. Munir Fahmi, Dipl.ME, MT. got his master degree from Brawijaya University Malang majoring in Energy Conversion. He is till now becoming lecturer at mechanical engineering Poltek ITB (Polban) and he is head of laboratory of fluid, thermal and otomotive. He teachs frequently for industrial training class for Indonesian companies participants for some topics on mechanical engineering such as Mechanical Rotating Equipment, Operation & Trouble Shooting, Pumps, Primover: Operation, Maintenance & Troubleshooting, Genset, Operation, Maintenance & Trouble Shooting, lubrication, Preventive & Predictive Maintenance, Advance Maintenance Management, Reliability Maintenance Engineering, Operation, Maintenance & Trouble Shooting of Pump & Compressor and etc.



VENUE :

  • Hotel Golden Flower, Bandung
  • Hotel Harris Tuban Bali/ Hotel Bintang****

TRAINING DURATION :

4 days

TRAINING TIME :

  1. 09 – 10 Januari 2012
  2. 02 – 05  April 2012
  3. 02 – 05 Juli 2012
  4. 01 – 04 Oktober 2012
  5. 14 – 17 November 2012

INVESTATION PRICE/PERSON :

Bandung

  1. Rp 7.250.000/person (full fare)  or
  2. Rp 7.000.000/person (early bird, payment  1 week before training) or
  3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

Bali

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment  1 week before training) or
  3. Rp 8.250.000/person (if there are 3 persons or more from the same company)




FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified  instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)


Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

Incoming search terms:

  • sistem kerja mech seal
Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • TwitThis
  • Facebook
  • LinkedIn
  • MySpace
  • YahooBuzz
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • Technorati
  • YahooMyWeb

Tags: , , , , , , , , , ,

Category: Bali, Bandung, Maintenance

About the Author (Author Profile)

Comments (0)

Trackback URL | Comments RSS Feed

There are no comments yet. Why not be the first to speak your mind.

Leave a Reply

Switch to our mobile site