By May 28, 2019 0 Comments Read More →

PIPELINE INTERNAL CORROSION CONTROL AND MONITORING

PIPELINE INTERNAL CORROSION CONTROL AND MONITORING

Bandung | 25 – 28 Juni 2019 | Rp 8.950.000/ peserta
Bandung | 15 – 18 Juli 2019 | Rp 8.950.000/ peserta
Bandung | 12 – 15 Agustus 2019 | Rp 8.950.000/ peserta
Bandung | 09 – 12 September 2019 | Rp 8.950.000/ peserta

Jadwal Training 2019 Selanjutnya …

 

 

INTERNAL CORROSION CONTROL AND MONITORING TRAINING DESCRIPTION AND BENEFITS PIPELINE

  • This course is for either corrosion engineers or non corrosion engineering personnel who involve in oil & gas operations and maintenance, pipeline and asset integrity management, pipeline inspection and pigging, material purchasing, chemical selection and injection, hazard and HSE management, and any corrosion related activity.
  • By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more detail about internal corrosion control and monitoring, and understand how to select and use of corrosion inhibitors and chemicals.
  • After completion of this course, participants will understand what internal corrosion is, how to detect, predict and monitor their growth, and how to control these serious problems in the pipeline.

 

INTERNAL CORROSION CONTROL AND MONITORING TRAINING HIGHLIGHTS

  • Internal Corrosion Problem in the Pipeline
  • H2S, CO2, and Acidic Corrosive Components
  • Sour Corrosion and Microbial Induced Corrosion
  • Equipment and Pipeline Leakage and Rupture by Corrosion
  • Fluid Properties and the Corrosion Tendency
  • Internal Corrosion Monitoring and Corrosion Prediction
  • Internal Corrosion Control and Prevention Methods

 

INTERNAL CORROSION CONTROL AND MONITORING TRAINING OUTLINE

  1. Oil, condensate, gas, and water flowing in the pipeline
  2. Corrosion in water re-injection system and the injection line
  3. Corrosion in sea water injection system
  4. The role of H2S, CO2, and acidic impurities in the fluid
  5. Nature of H2S corrosion, pitting and stress corrosion cracking
  6. Nature of CO2 corrosion
  7. Sour corrosion and top of line corrosion problems
  8. Microbial induced corrosion mechanism and its related problems
  9. Corrosion caused by SRB and the pitting mechanism
  10. Corrosion caused by oxygen penetration
  11. Examples of corrosion damage and pipeline leakage
  12. Corrosion monitoring methods in oil & gas field
  13. Oil & gas filed corrosion prevention methods
  14. Corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals
  15. Dosage and injection methods of corrosion inhibitors
  16. SRB control with biocides and the selection of suitable and low risk biocide formula
  17. Dosage and injection methods of biocides
  18. Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger
  19. Dosage and injection methods of oxygen scavenger
  20. Safety in oil & gas corrosion prevention

 

INTERNAL CORROSION CONTROL AND MONITORING TRAINING METHOD, MATERIALS AND PROGRAM

  • The course will be delivered in the form of classroom exposition, case studies and open discussion. Course materials will be handed out as hard and soft copy.
  • The course will be given in Bahasa Indonesia.  In special case, upon request, it will be in English.

 

INSTRUKTUR TRAINING

Ir.Hilman Ahmad,DCE. and Associates

Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

VENUE 

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION 

4 days

 

JADWAL TRAINING 2019

  1. 25 Jun 2019-28 Jun 2019
  2. 15 Jul 2019-18 Jul 2019
  3. 12 Agust 2019-15 Agust 2019
  4. 09 Sep 2019-12 Sep 2019
  5. 14 Okt 2019-17 Okt 2019
  6. 11 Nop 2019-14 Nop 2019
  7. 03 Des 2019-06 Des 2019

 

INVESTATION PRICE/PERSON 

  1. Rp 8.950.000/person (full fare) or
  2. Rp 8.750.000/person (early bird, payment 1 week before training) or
  3. Rp 8.500.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Qualified and experienced instructor
  10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)
Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. PERSONAL DATA
  4. (valid email required)
  5. PRE REGISTRATION DATA (Tidak Mengikat)
  6. MESSAGE FOR TRAINING PROVIDER
 

 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • MisterWong
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit

About the Author:

Post a Comment