By July 19, 2014 0 Comments Read More →



Bandung | 18 – 20 August 2014 | Rp 6.950.000/person
Bandung | 08 – 10 September 2014 | Rp 6.950.000/person
Bandung | 08 – 10 October 2014 | Rp 6.950.000/person
Bandung | 10 – 12 November 2014 | Rp 6.950.000/person
Bandung | 08 – 10 December 2014 | Rp 6.950.000/person



Risk-Based Inspection is a systematical process that identifies, assesses and map  industrial risks, which can compromise equipment integrity in both pressurized  equipment and structural elements. The high risk equipments are then managed by a  proper inspection interval, method and coverage. In the RBI philosophy, it is more cost- effective to allow some systems to fail as long as the consequences of the failure are  low, on the other hand, some systems may have such high consequences of failure  that failure is totally unacceptable, and therefore, these items should receive most  attention by using a proper inspection plan & practice. In this course API 581 and API  580 and other DNV and ABS guidelines and recommended practices, will be consulted.


  1. Defining boundary system to be assessed
  2. Screening operating unit within a plant to identify area of high risk.
  3.  Identifying the damage mechanism operative
  4. Determining the technical module sub-factor and likelihood of failures
  5.  Determining the hazard areas and consequence of failure
  6. Estimating a risk value of each equipment, tabulated and ranked
  7. Prioritizing the equipment maintenance based on a the measured risk
  8. Designing an appropriate inspection program.
  9. Systematically managing the risk equipment failures.



  • Increased knowledge of equipment which may pose a potential risk.
  • More reliable equipment and plant operation.
  • Increased safety.
  • Cost optimization through switching to non-invasive inspection techniques.
  • Possibility to tailor shutdown scope.
  • Option to extend run lengths where applicable national regulations permit it.
  • Increased teamwork during the implementation process.
  • Development of a knowledge database including equipment design, process features, damage mechanisms and inspection strategies


Plant and Pipeline Operators, Supervisors, Engineers and Manager or every one who should know this topic.


Dr. Ahmad Taufik, M.Eng.
Dr.Ahmad Taufik,M.Eng. is Risk and Integrity Specialist, and  Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses. He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager,  PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufik is an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity  research for pipeline, mechanical and pressurized system. He is member of ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia.


Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus


3 days




  1. 15 – 17 January 2014
  2. 10 – 12 February 2014
  3. 10 – 12 March 2014
  4. 7 – 9  April 2014
  5. 12 – 14 May 2014
  6. 9 – 11 June 2014
  7. 24  – 26  June 2014
  8. 7 – 9 July 2014
  9. 18 – 20 August 2014
  10. 8 – 10 September 2014
  11. 8 – 10 October 2014
  12. 10 – 12 November 2014
  13. 8 – 10 December 2014


  1. Rp 6.950.000/person (full fare)  or
  2. Rp 6.750.000/person (early bird, payment 1 week before training) or
  3. Rp 6.500.000/person (if there are 3 persons or more from the same company)



  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified and experienced instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • MisterWong
  • Y!GG
  • Webnews
  • Digg
  • StumbleUpon
  • Reddit

About the Author:

Post a Comment