By December 21, 2014 0 Comments Read More →

Safety Relief Valve: Fundamental Concepts, Sizing and Selection

Safety Relief Valve: Fundamental Concepts, Sizing and Selection

Bandung | 24 – 27 Februari 2014 | Rp 8.500.000/person
Bandung | 24 – 27 Maret 2014 | Rp 8.500.000/person
Bandung | 23 – 26 April 2014 | Rp 8.500.000/person
Bandung | 21 – 24 Mei 2014 | Rp 8.500.000/person
Bandung | 23 – 26 Juni 2014 | Rp 8.500.000/person

Jadwal Training 2014 Selanjutnya …

 

COURSE OBJECTIVE

Safety relief valves are key assets in any process plant that operates under pressure. Acting as a ‘last resort’, these fully mechanical devices are designed to operate if an over-pressure situation occurs. They therefore safeguard the plant and help guarantee production, but more importantly, protect the plant’s most valuable asset, its workforce

This comprehensive 4-days course is excellent both for the training of maintenance personnel as well as for the multi-craft training needs of process and manufacturing facilities. This course also will train participants on how to install tubing and piping systems, disassemble, clean, inspect, align, and reassemble a variety of piping and valves.

YOU WILL LEARN ABOUT

  • Safety Valve Operation
  • Safety Valve Maintenance
  • Disassembly, Reassembly and Installation
  • Removing the Disc Assembly and Checking the Seat
  • Installing and Setting
  • Removing and Checking the Pilot Valve
  • Valve Seat Repairs

COURSE OUTLINE

  1. Pressure-Relieving Devices: Introduction; Relief-Valve; Safety Valve; Safety Relief Valve; Rupture Disc; Conventional Safety Relief Valve; Types and Functions of Pressure Relieving Devices
  2. Relief-Valve and Safety-Valve: Valve Operational; Relief-Valve and Safety Valve Components; Force within Relief-Valve; Valve Body; Nozzle and Flans; Seating; Seal; Leakage; Additional Components; Lift Mechanism; Choke; Jacketed Bodies; Maintenance
  3. Pilot-Operated Valve and Rupture Disc Performance: Valve Operational; Spring Operated Valve; Lever Capacity; Rupture Disc; Relief-Valves; Maintenance
  4. Performance Evaluation: Several Key Factors in Selection Process; Conventional Valves; Balanced Safety Relief Valve; Pilot Operated Valve; Rupture Disc; Overpressure; Failure Root Cause
  5. Sizing: Introduction; Viscose and Non-viscose Fluids; Gas and Steam; Calculations; Removal Methods; Flares; Mounting; Capacity
  6. Conversion for Safety Valves: Installation and Operation Standard Procedures

WHO SHOULD ATTEND

  • Instrumentation Engineers & Technicians
  • Design and Process Engineers
  • Operation Engineer
  • Asset Manager Team members
  • Maintenance Manager/ Superintendent & Supervisor
  • Everybody who are responsible for selecting, purchasing, or repairing safety relief valves.

Instructor
Dr. Ir. Sutanto Hadisupadmo is a professor of industrial instruments of engineering physics, and is a Head of Laboratory of Industrial Instrumentation at ITB. He has over 20 years of experience doing consulting work in instrumentation issues and former Director of Instrumentation Center and Technical Services of ITB. Mr. Sutanto has trained many short courses for PT. TOTAL Indonesie, Pertamina, PT. Petrokimia Gresik, PT. Badak LNG, PT. Pupuk Iskandar Muda, PT. Pupuk Kaltim, and PT. Jaya Ancol emphasizing on measurement control system, safety and security. He also holds a Diploma in Energetique from University of Perpignan, France

 

VENUE :

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :

4 days


Jadwal Training 2014

  1. 24 – 27 Februari 2014
  2. 24 – 27 Maret 2014
  3. 23 – 26 April 2014
  4. 21 – 24 Mei 2014
  5. 23 – 26 Juni 2014
  6. 14 – 17 Juli 2014
  7. 27 – 30 Agustus 2014
  8. 22 – 25 September 2014
  9. 27 – 30 Oktober 2014
  10. 24 – 27 November 2014
  11. 15 – 18 Desember 2014

 

 

INVESTATION PRICE/PERSON :

  1. Rp 8.500.000/person (full fare)  or
  2. Rp 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • MisterWong
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit

About the Author:

Post a Comment