By February 11, 2015 0 Comments Read More →

SCADA UNTUK OPERATOR & TEKNISI – Almost Running

SCADA UNTUK OPERATOR & TEKNISI

Yogyakarta | 03 – 06 Maret 2015 | Rp 7.950.000
Yogyakarta | 27 – 30 April 2015 | Rp 7.950.000
Yogyakarta | 04 – 07 May 2015 | Rp 7.950.000
Yogyakarta | 08 – 11 Juni 2015 | Rp 7.950.000
Yogyakarta | 27 – 30 Juli 2015 | Rp 7.950.000

Jadwal Training 2015 Selanjutnya …



LATAR BELAKANG SCADA UNTUK OPERATOR & TEKNISI
:

Pemantauan merupakan aktifitas sangat penting untuk menjamin kelangsungan proses. Kelangsungan sebuah proses dapat mencakup kelangsungan operasi, penjaminan kualitas, penjaminan keselamatan dan sebagaimya. Sejalan dengan kemajuan teknologi informasi maka seluruh kondisi aktifitas industri diinginkan untuk dapat dipantau secara real-time. Hal tersebut sangat penting, karena jika diinginkan pengambilan keputusan yang cepat, maka keputusan tersebut dapat diambil dengan dukungan data yang terpadu dan terkini. Supervisory Control And Data Acquisition atau SCADA, merupakan konsep yang dikembangkan untuk keperluan tersebut, sehingga semua peralatan yang menyajikan data diharapkan dapat melaporkan secara otomatis data yang dimilikinya ke sistem pengawasan tanpa kendala cuaca, kondisi medan, kondisi lingkungan dan sebagainya.

Konsep maupun peralatan yang sangat berpengaruh terhadap pengambilan keputusan tersebut tentu saja sangat perlu untuk dipahami seluruh jajaran yang secara langsung atau tidak langsung terlibat. Pemahaman akan konsep dasar, terminologi, serta peralatan yang digunakan serta cara kerjanya menjadi penting agar konsep yang memerlukan keterpaduan atau integrasi tersebut juga dipahami secara terpadu di semua level.



SASARAN TRAINING:

Dengan mengikuti pelatihan diharapkan peserta dapat memahami:

  1. Konsep dan tujuan SCADA
  2. Terminologi yang digunakan dalam SCADA
  3. Memahami SCADA, HMI, DCS, dan sebagainya.
  4. Memahami persyaratan peralatan yang digunakan dalam SCADA
  5. Memhami keuntungan dan kerugian SCADA
  6. Memahami perannya dalam sistem yang menggunakan SCADA

 



CAKUPAN
MATERI TRAINING SCADA UNTUK OPERATOR & TEKNISI:

  1. SCADA dalam implementasi industri
  2. Dasar-dasar SCADA
    1. Apa itu SCADA, HMI, DCS?
    2. Supervisi vs. kontrol
    3. Hardware dalam SCADA
    4. Filosofi pengoperasian
  3. Infrastruktur  SCADA
    1. Remote Terminal Unit (RTU)
    2. Jaringan dan infrastrukturnya
    3. Sensor, pengolah dan penkondisi data
  4. Arsitektur  SCADA
    1. Generasi pertama: “Monolithic”
    2. Generasi kedua: “Distributed”
    3. Generasi ketiga: “Networked”

 



SASARAN
PESERTA:

Operator dan Teknisi atau semua pihak yang ingin memahami topic ini.



INSTRUCTOR :

Dr.Ir. Paryana Puspaputra, M.Eng., and Team

Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012. He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, CAESAR II, etc.



VENUE :

Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)



TRAINING DURATION :
 

4 days

JADWAL 2015:

  1. 02 Feb 2015-05 Feb 2015
  2. 03 Mar 2015-06 Mar 2015
  3. 27 Apr 2015-30 Apr 2015
  4. 04 May 2015-07 May 2015
  5. 08 Jun 2015-11 Jun 2015
  6. 27 Jul 2015-30 Jul 2015
  7. 03 Aug 2015-06 Aug 2015
  8. 29 Sep 2015-02 Oct 2015
  9. 19 Oct 2015-22 Oct 2015
  10. 03 Nov 2015-06 Nov 2015
  11. 30 Nov 2015-03 Dec 2015


INVESTATION PRICE/PERSON :

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)



FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of SCADA training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • MisterWong
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit

About the Author:

Post a Comment